LED: Cree XM-L2 Cool White (Norminal CCT 6300K). User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. Light Output (runtimes) – High: H1 300 Lm (0.9 hrs) or H2 184 Lm (1.7 hrs) / 116 Lm (3 hrs), Medium: M1 54 Lm (7.5 hrs) or M2 27 Lm (12 hrs) / 13 Lm (27 hrs), Low: L1 2.9 Lm (4 days) or L2 0.36 Lm (3 weeks) / 0.06 Lm (2 months) / 0.01 Lm (3 months). Beacon Strobe Mode: 4Hz Strobe at H1 / 19Hz Strobe at H1. Light output are ANSI out the front (OTF) values. Runtimes tested (and parasitic drain estimated) using Sanyo 2000mAh Eneloop AA batteries. Light output with 14500 batteries are the same except that the H1 is 535Lm for the first minute and then step down to 300Lm. Operating Voltage Range: 0.7V – 4.2V Battery: One 1.5V AA (NiMH, lithium or alkaline) or 3.7V 14500 li-ion rechargeable. Batteries are not included in the package. Parasitic Drain: Negligible (much less than the self discharging of a battery). Beam Type: 80 degree spill, 12 degree hot spot. Head Diameter: 0.86 inch (21.8 mm). Length: 3 inch (76.5 mm). Weight 1.1 oz (32 gram), 2.9 oz (80 gram) with an Eneloop AA and headband. Other Features: Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start), Low battery alert when the light is switched Off (LED flashes if the battery voltage is below 1.06V), Automatic stepping down to lower output when battery (AA and 14500) capacity is low, Built-in over-discharging protection for 14500 batteries at 2.8V cutoff, Durable electronic soft-touch switch, Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing, Sealed and potted LED driver circuitry, Tempered optical grade glass, Battery power can be disconnected by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain.

Cree XP-L2 EasyWhite LED: Nominal CCT 4500K, Minimum CRI- 80, Tint deviation: 3-Step. User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels. Light Output (runtimes) – High: H1 320 Lm (0.9 hr) or H2 267 Lm (1.6 hr) / 192 Lm (2.3 hrs) / 119 Lm (4.2 hrs), Medium: M1 63 Lm (8.5 hrs) or M2 29 Lm (21 hrs) / 12 Lm (41 hrs) / 4 Lm (4.5 days), Low: L1 1.2 Lm (13 days) or L2 0.3 Lm (1.1 month) / 0.06 Lm (2.2 months) / 0.01 Lm (3.3 months), Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1. Light output are ANSI out the front (OTF) values. Runtimes tested (and parasitic drain estimated) using Panasonic Eneloop Pro AA batteries. Remaining battery power, about 10-20%, after step-down are not counted towards the runtimes. Operating Voltage Range: 0.7V – 2.0V. Battery: One AA size NiMH, lithium or alkaline battery. Panasonic Eneloop or Eneloop Pro is highly recommended. Batteries are not included in the box. Parasitic Drain: Negligible (much less than the self discharging of a battery). Beam Type: Floody beam from frosted lens, with 90 degree beam spread. Dimensions – Head Diameter: 0.86 inch (21.8 mm), Length: 2.9 inch (75 mm), Weight 1.1 oz (31 gram), 2.0 oz (56 gram) with an Eneloop AA battery, 2.8 oz (79 gram) with an Eneloop AA battery and headband. Features: Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start); All levels are current regulated; Durable electronic soft-touch switch; Durable natural hard anodized finish (Type III Class I); Sealed and potted LED driver circuitry; Battery reverse polarity protection; Tempered optical grade glass; Orange peel reflector; Battery power can be disconnected by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain.

LED: Cree XM-L2 Cool White (Nominal CCT 6300K). User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels. Light Output (runtimes) – High: H1 456 Lm (PID, approx 1.4 hr) or H2 250 Lm (1.6 hrs) / 102 Lm (4.1 hrs), Medium: M1 50 Lm (11 hrs) or M2 22 Lm (26 hrs) / 8.5 Lm (70 hrs), Low: L1 2.5 Lm (8 days) or L2 0.38 Lm (38 days) / 0.05 Lm (2.5 months) / 0.01 Lm (3 months), Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1. Light output are ANSI out the front (OTF) values. Runtimes tested (and parasitic drain estimated) using Panasonic CR123A batteries. Operating Voltage Range: 2.7V – 4.2V. Battery: One CR123A or 3.6/3.7V 16340 li-ion rechargeable. Batteries are not included in the box. Parasitic Drain: Negligible (much less than the self discharging of a battery). Beam Type: Floody beam from frosted lens, with 90 degree beam spread. Dimensions – Head Diameter: 0.9 inch (22.8 mm), Length: 2.7 inch (68.6 mm). Weight: 1.16 oz (33 gram). Features: PID thermal regulated output at the H1 level, Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start), Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low, Builtin over-discharging protection, Durable electronic soft-touch switch, Smart user interface provides fast and easy access to all brightness levels and beacon-strobes, Durable natural hard anodized finish (Type III Class I), Sealed and potted LED driver circuitry, Battery reverse polarity protection, Tempered optical grade glass, Orange peel textured reflector, Waterproof to IPX7 (2 meters, 30 minutes).

PID thermal regulated output at the H1 level Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start) Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low Builtin over-discharging protection Durable electronic soft-touch switch Smart user interface provides fast and easy access to all brightness levels and beacon-strobes. Precision machined unibody casing from premium grade aluminum bar stocks Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing Durable natural hard anodized finish (Type III Class I) Sealed and potted LED driver circuitry Battery reverse polarity protection Tempered optical grade glass Orange peel textured reflector Waterproof to IPX7 (2 meters, 30 minutes)

LED: Cree Red XP-E
User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels or strobes.
Light Output
High: H1 100 Lm (0.9 hrs) or H2 61 Lm (1.9 hrs) / 38 Lm (3.3 hrs) / 4Hz Strobe
Medium: M1 19 Lm (7.5 hrs) or M2 10 Lm (12 hrs) / 4.6 Lm (27 hrs)
Low: L1 1 Lm (4 days) or L2 0.13 Lm (2.8 weeks) / 0.02 Lm (1.8 months) / 0.003 Lm (2.8 months)
Light output are ANSI out the front (OTF) values. Runtime tests are done using Sanyo 2000mAh Eneloop AA batteries.
Operating Voltage Range: 0.7V – 2.5V
Battery: One 1.5V AA (NiMH, lithium or alkaline). 14500 Li-ion batteries are not supported. Batteries are not included in the package.
Parasitic Drain: Negligible (equivalent to 16 years)

Dimensions
Diameter: 0.84 inch (21.3 mm)
Length: 2.76 inch (70.1 mm)
Weight
2oz (55 gram) with an Eneloop AA
2.8 oz (78 gram) with an Eneloop AA and headband

Features
Smart user interface provides fast and easy access to all brightness levels
Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing, providing unblocked thermal paths to over 92% of the surface area.
Durable natural hard anodized finish (Type III Class I)
Tempered optical grade glass
Waterproof to IPX7 (2 meters, 30 minutes)

LED: Philips LUXEON T Neutral White (Typical CRI 85, Nominal CCT 5000K)
User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels or strobes.
Light Output
**High: H1 190 Lm (0.9 hrs) or H2 117 Lm (1.9 hrs) / 73 Lm (3.3 hrs)
**Medium: M1 36 Lm (7.5 hrs) or M2 18 Lm (12 hrs) / 9 Lm (27 hrs)
**Low: L1 2 Lm (4 days) or L2 0.25 Lm (3 weeks) / 0.04 Lm (2 months) / 0.01 Lm (3 months)
**Beacon Strobe Mode: 4Hz Strobe at H1 / 19Hz Strobe at H1
Operating Voltage Range: 0.7V – 4.2V
Battery: One 1.5V AA (NiMH, lithium or alkaline). 14500 Li-ion batteries are not supported. Batteries are not included in the package.
Parasitic Drain: Negligible (equivalent to 16 years)
Beam Type: Flood, with 120 degree beam spread
Dimensions
**Diameter: 0.84 inch (21.3 mm)
**Length: 2.76 inch (70.1 mm)
Weight
**1oz (29 gram)
**2oz (55 gram) with an Eneloop AA
**2.8 oz (78 gram) with an Eneloop AA and headband

LED: Cree XM-L2 Cool White (Norminal CCT 6300K). User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of each main level can be further programmed to different brightness levels or strobes. Light Output – High: H1 278 Lm (0.9 hrs) or H2 171 Lm (1.9 hrs) / 107 Lm (3.3 hrs), Medium: M1 53 Lm (7.5 hrs) or M2 27 Lm (12 hrs) / 13 Lm (27 hrs), Low: L1 2.9 Lm (4 days) or L2 0.36 Lm (3 weeks) / 0.06 Lm (2 months) / 0.01 Lm (3 months), Beacon Strobe Mode: 4Hz Strobe at H1 / 19Hz Strobe at H1. Light output are ANSI out the front (OTF) values. Runtime tests are done using Sanyo 2000mAh Eneloop AA batteries. Operating Voltage Range: 0.7V – 2.5V. Battery: One 1.5V AA (NiMH, lithium or alkaline; not included). 14500 Li-ion batteries are not supported. Flood beam with 120 degree beam spread. Dimensions – Diameter: 0.84 inch (21.3 mm), Length: 2.76 inch (70.1 mm). Weight – 1oz (29 gram), 2oz (55 gram) with an Eneloop AA, 2.8 oz (78 gram) with an Eneloop AA and headband. Features – Electronic soft-touch switch, with a 200,000 cycle operating life, Precision machined unibody casing from premium grade Alcoa aluminum bar stock, Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing, providing unblocked thermal paths to over 92% of the surface area. Durable natural hard anodized finish (Type III Class I). Tempered optical grade glass. Waterproof to IPX8 (2 meters, 30 minutes). Accessories in the package: Pocket clip, One black silicone holder with headband, Two o-rings.

Cree XHP35 Neutral White LED, Nominal CCT: 4500K, CRI: 80+. User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels. Light Output – 1358 Lumens. Operating Voltage Range: 2.7V – 6.0V. Battery: One 18650 size (up to 69 mm) 3.6-4.35V li-ion rechargeable. Batteries are not included in the package. Parasitic Drain: Negligible (much less than the self discharging of a battery). Beam Type: Floody beam from frosted lens, with 90 degree beam spread. Dimensions – Head Diameter: 0.95 inch (24.2 mm), Length: 3.85 inch (97.8 mm). Weight 1.4 oz (39 gram), 3.0 oz (84.6 gram) with ZL635 battery, 4.4 oz (124.6 gram) with ZL635 battery and headband. Features PID thermal regulated outputs (three highest output levels). Builtin battery protections with continuously monitored temperature, current, and voltage, plus a (2.7V) low voltage cutoff. Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start). Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low. Durable electronic soft-touch switch. Sealed and potted LED driver circuitry. Tempered optical grade glass. Orange peel textured reflector. Battery reverse polarity protection. This light comes with three mode groups, G5, G6 and G7.